FAQ O-HT-1A-GN

Solutions may help you:

1. Turn the dial to ON position.

2. Replace with new batteries if low battery indicator flashes.

3. To cancel rain delay, long press DELAY button (3 secs) with the dial at ON.

4. Turn the dial to each position and make sure all setups are correct.

Solutions may help you:

1. Clean the filter or replace it with a new one.

2. Make sure the timer is installed properly and not cross-threaded.

3. Installed a booster pump or other booster pressurizing equipment.

Solutions may help you:

1. Turn the dial to ON position.

2. Replace with new batteries if low battery indicator flashes.

3. Turn on the faucet.

4. Reset the solenoid valve: Step 1: Attach timer on a faucet and open the faucet to max. Step 2: Manually tum timer on for more than 5 secs and turn it off.
Repeat above steps more than 5 times until water get through the valve smoothly.

Solutions may help you:

1. To cancel manual watering, turn the dial to OFF and back to ON.

2. Reset the solenoid valve: Step 1: Attach timer on a faucet and open the faucet to max.
Step 2: Manually turn timer on for more than 5 secs and tum it off.
Repeat above steps more than 5 times until water get through the valve smoothly.

Solutions may help you:

1. Check if filter washer is clean and undamaged.

2. Check if the faucet or hose are 3/4"NH thread while all connections are hand tight and not cross-threaded.

3. Water pressure should be 8-120PSI (0.5-8.0Bar).

Solutions may help you:

1. The fog will disappear when the temperature rises, or leave it stand for a period of time.

2. Replace with new batteries. Remember to keep your hands dry when install batteries.

3. Contact the customer service for a new replacement.